xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Download Configuration File to SD Card
Figure 8 - 8. Download Configuration File to SD Card window (DGS-3200-24)
Use th e radio button to select eith er IPv 4 or IPv6 . En ter t he TF TP Se rver IP a ddress for the ty pe of IP selected. Specify the
path/file name of the TFTP File. Specify the SD Card File name. Click Download to initiate the file transfer.
Download Firmware/Download Firmware to NV-RAM
The Switch supports dual image storage for firmware file backup and restoration. The firmware images are indexed as Active, 1,
or 2.
Open the Tools dr op-down menu o n t he left-hand si de of t he menu bar at t he t op of t he Web m anager and cl ick Download
Firmware to open the following window:
Figure 8 - 9. Download Firmware window (DGS-3200-10 and DGS-3200-16)
Figure 8 - 10. Download Firmware to NV-RAM window (DGS-3200-24)
Use th e radio button to select eith er IPv 4 or IPv6 . En ter t he TF TP Se rver IP a ddress for the ty pe of IP selected. Specify the
path/file name of the TFTP File. Select the desired Image ID, Active, 1 or 2. Click Download to initiate the file transfer.
253
To Next Page
Loading...
