D-Link xStack DGS-3200-10 - Upload Configuration File;Upload Configuration File to TFTP

xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Download Firmware to SD Card
Figure 8 - 11. Download Firmware to SD Card window (DGS-3200-24)
Use th e radio button to select eith er IPv 4 or IPv6 . En ter t he TF TP Se rver IP a ddress for the ty pe of IP selected. Specify the
path/file name of the TFTP File. Specify the SD Card File name. Click Download to initiate the file transfer.
Upload Configuration File/Upload Configuration File to TFTP
The Switch can store dual configuration files. The configuration files are indexed as Active, 1, or 2.
Open th e Tools d rop-down menu on t he l eft-hand side of t he m enu bar at t he t op of t he Web m anager an d cl ick Upload
Configuration File to open the following window:
Figure 8 - 12. Upload Configuration File window (DGS-3200-10 and DGS-3200-16)
Figure 8 - 13. Upload Configuration File to TFTP window (DGS-3200-24)
Use th e radio button to select eith er IPv 4 or IPv6 . En ter t he TF TP Se rver IP a ddress for the ty pe of IP selected. Specify the
path/file name of the TFTP File. Select the desired Configuration ID, Active, 1 or 2. Click Apply to initiate the file transfer.
254