D-Link xStack DGS-3200-10 - SNMP Global State Settings; SNMP Linkchange Trap Settings

xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
40
SNMP Global State Settings
SNMP global state settings can be enabled or disabled.
To view the following window, click Configuration > SNMP Settings > SNMP Global State Settings:
Figure 2 - 39. SNMP Global State Settings window
Click the
Apply
button to let your change take effect.
SNMP Linkchange Trap Settings
Users can set SNMP linkchange traps.
To view the following window, click Configuration > SNMP Settings > SNMP Linkchange Trap Settings:
Figure 2 - 40. SNMP Linkchange Trap Settings window
To set SNMP linkchange traps on the Switch, use the From Port and To Port drop-down menus to select the desired port range and
then change the State to Enabled.