D-Link xStack DGS-3200-10 User Manual

xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
250
Section 8
Save and Tools
Save Configuration
Save Log
Save All
Download Configuration File/Download Configuration File to NV-RAM (DG
S-3200-24 only)
Download Configuration File to SD Card (DGS-3200-2
4 only)
Download Firmware/Download Firmware to
NV-R
AM (DGS-3200-24 only)
Download Firmware to SD Card (DGS-3200-24 only)
Upload Configuration File/Upload Configuration File to TFTP
Upload Log File/Upload Log File to TFTP
Reset
Reboot System
The t
h
ree main Save windows include: Save Configuration, Save Log, and Save All.
The options include:
 Save Configuration to save the configuration file indexed as Active, ID 1 or 2 (or SD Card for the DGS-3200-24 only).
 Save Log to save the current log to NV-RAM (or SD Card for the DGS-3200-24 only).
 Save All to immediately save the current configuration file and the current log.
The eight main Tools windows include: Download Configuration File/Download Configuration File to NV-RAM, Download
Configuration File to SD Card, Download Firmware/Download Firmware to NV-RAM, Download Firmware to SD Card,
Upload Confi guration File/Upload Confi guration File to TFTP, Upload L og File/Upload L og File to TFTP , Reset, a nd
Reboot System
The options include:
 Download Configuration File/Download Configuration File to NV-RAM to download a co nfiguration file from a TFTP
server indexed as ID 1, 2, or Active to NV-RAM.
 Download Config uration File to SD Card to download a c onfiguration file fr om a TFTP server indexed as I D 1, 2, or
Active to an SD Card.
 Download Firmware/Download Firmware to NV-RAM to download a firmware file from a TFTP server indexed as ID 1,
2, or Active to NV-RAM.
 Download Firmware to SD Card to download a firmware file from a TFTP se rver indexed as ID 1, 2, or Active to
an
SD
Card
 Upload Configuration File/Upload Configuration File to TFTP to upload a configuration file to a TFTP server indexed as
ID 1, 2, or Active.
 Upload Log File/Upload Log File to TFTP to upload a log file to a TFTP server.
 Reset to reset the system with the exception of th e IP add ress, log, user accoun t, and banner; to reset co nfiguration to the
factory default values; or to reset the system to the factory default values and reboot the Switch.
 Reboot System to restart the Switch and save the settings from the current session or not.

D-Link xStack DGS-3200-10 Specifications

General

Brand	D-Link
Model	xStack DGS-3200-10
Category	Network Router
Language	English