xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
163
Configuring MAC Settings Configuration on Ports:
Parameter Description
From Port
The beginning port of a range of ports to be configured for MAC-based Access
Control.
To Port
The ending port of a range of ports to be configured for MAC-based Access Control.
State
Use this drop-down menu to enable or disable MAC-based Access Control on the port
or range of ports selected in the Port Settings section of this window.
Mode
Toggle between Port-based and Host-based.
Aging Time (1-1440)
Enter a value between 1 and 1440 minutes. The default is 1440. Tick the adjacent
Infinite checkbox to disable aging.
Hold Time (1-300)
Enter a value between 1 and 300 seconds. The default is 300. Tick the adjacent
Infinite checkbox to disable the hold time.
Click the Apply button in the fourth section to implement the configuration changes.
To Next Page
Loading...
