xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
186
dst port mask - Specify a UDP port mask for the destination port in hex form (hex
0x0-0xffff).
Protocol ID - Enter a value defining the protocol ID in the packet header to mask. Specify the
protocol ID mask in hex form (hex 0x0-0xff).
Click Apply to implement changes made.
To view the setting details for a created profile, click th e Show Details button for the corresponding entry on the Access Profile
List window, revealing the following window:
Figure 6 - 6. Access Profile Detail Information window for IPv4
The window shown below is the Add ACL Profile window for IPv6:
Figure 6 - 7. Add ACL Profile window for IPv6
The following parameters can be set for the IPv6 ACL type:
Parameter Description
Select Profile ID
Use the drop-down menu to select a unique identifier number for this profile set. This value
can be set from 1 to 200.
To Next Page
Loading...
