xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
231
Figure 7 - 21. Authenticator State window (Port-based 802.1X Authentication Mode)
This window displays th e Au thenticator State for ind ividual ports on a selected device. A po lling interval between 1 an d 60
seconds can be set using the drop-down menu at the top of the window and clicking OK.
The information on this window is described as follows:
Parameter Description
Auth PAE State
The Authenticator PAE State value can be: Initialize, Disconnected, Connecting, Authenticating,
Authenticated, Aborting, Held, Force_Auth, Force_Unauth, or N/A. N/A (Not Available) indicates
that the port's authenticator capability is disabled.
Backend State
The Backend Authentication State can be Request, Response, Success, Fail, Timeout, Idle,
Initialize, or N/A. N/A (Not Available) indicates that the port's authenticator capability is disabled.
Port Status
Controlled Port Status can be Authorized, Unauthorized, or N/A.
MAC Address
The MAC Address of the device of the corresponding index number.
To Next Page
Loading...
