D-Link xStack DGS-3200-10 - Page 287

xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
274
Port shut down due to a
packet storm
Port <unitID:portNum> is
currently shut down due to a
packet storm
Warning
JWAC
Login OK
JWAC login successful
(Username:%s,IP:%s,MAC:%s
,Port:%s)
Informational
Login Fail
JWAC login rejected
(Username:%s,IP:%s,MAC:%s
,Port:%s)
Warning
Logout normal
JWAC host logout normally
(Username:%s,IP:%s,MAC:%s
,Port:%s)
Informational
Logout forcibly
JWAC host logout forcibly
(Username:%s,IP:%s,MAC:%s
,Port:%s)
Warning
Age out
JWAC host age out
(Username:%s,IP:%s,MAC:%s
,Port:%s)
Informational
Loopback
Detection
Port loop occurred
Port <[unitID:]portNum> LBD
loop occurred. Port blocked.
Critical
Port loop detection
restarted after interval
time
Port <[unitID:]portNum> LBD
port recovered. Loop
detection restarted.
Informational
Port with VID loop
occurred
Port <[unitID:]portNum> VID
vlanID> LBD loop occurred.
Packet discard begun.
Critical
Port with VID Loop
detection restarted after
interval time
Port <[unitID:]portNum> VID
<vlanID> LBD recovered.
Loop detection restarted.
Informational
802.1X
VID assigned from
RADIUS server after
RADIUS client
authenticated by
RADIUS server
successfully. This VID
will assign to the port
and this port will be the
VLAN untagged port
member.
Radius server <ipaddr>
assigned vid :<vlanID> to
port <[unitID:]portNum>
(account :<username> )
Informational
stand-alone device port
<portNum>
stackable device Port:
<unitID:portNum>
Ingress bandwidth
assigned from
RADIUS server after
RADIUS client
authenticated by
RADIUS server
successfully. This
Ingress bandwidth will
assign to the port.
Radius server <ipaddr>
assigned ingress
bandwidth :<ingressBandwidt
h> to port <[unitID:]portNum>
(account : <username>)
Informational
stand-alone device port
<portNum>
stackable device Port:
<unitID:portNum>