xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
17
After entering the IP Address and MAC Address of the Static ARP entry, click Apply to implement the new entry. To completely
clear the static ARP entries, click the Delete All button.
To modify a st atic ARP en try, click the Edit button located on the right side of the en try in the ARP table at th e bottom of the
window.
To delete a static ARP en try, click the Delete button located on the right side of the entry in the static ARP tab le at the bottom of
the window.
To Next Page
Loading...
