xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
69
VLAN Name
Allows the entry of a name for the new VLAN or for editing the VLAN name in the Add/Edit
VLAN tab.
Advertisement
Enabling this function will allow the Switch to send out GVRP packets to outside sources,
notifying that they may join the existing VLAN.
Port
Shows all ports of the Switch for the 802.1Q configuration option.
Tagged
Specifies the port as 802.1Q tagging. Clicking the radio button will designate the port as tagged.
Untagged
Specifies the port as 802.1Q untagged. Clicking the radio button will designate the port as
untagged.
Forbidden
Click the radio button to specify the port as not being a member of the VLAN and that the port is
forbidden from becoming a member of the VLAN dynamically.
Not Member
Click the radio button to allow an individual port to be specified as a non-VLAN member.
Click Apply to implement changes made.
To search for a VLAN, click the
Find
VLAN
tab. A new tab will appear, as shown below. Enter the VLAN ID number in the
field offered and then click the
Find
button. You will be redirected to the
VLAN List
tab. See the table on the next page for a
description of the parameters in the new window.
Figure 3 - 8. Find VLAN tab of the 802.1Q VLAN window
To create a VLAN Batch entry click the
VLAN Batch Settings
tab, as shown below.
To Next Page
Loading...
