xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
82
The user-changeable parameters are as follows:
Parameter Description
Algorithm
Toggle between MAC Source Dest and IP Source Dest.
Group ID
Select an ID number for the group, between 1 and 5 for the DGS-3200-10, between 1 and 8
for the DGS-3200-16, and between 1 and 12 for the DGS-3200-24.
Type
This drop-down menu allows users to select between Static and LACP (Link Aggregation
Control Protocol). LACP allows for the automatic detection of links in a Port Trunking Group.
Master Port
Choose the Master Port for the trunk group using the drop-down menu.
State
Use the drop-down menu to toggle between Enabled and Disabled. This is used to turn a
port trunking group on or off. This is useful for diagnostics, to quickly isolate a bandwidth
intensive network device or to have an absolute backup aggregation group that is not under
automatic control.
Member Ports
Choose the members ports for the trunked group. Up to eight ports per group can be
assigned to a group.
Active Ports
Shows the ports that are currently forwarding packets.
After setting the previous parameters, click Apply to allow your changes to be implemented.
To Next Page
Loading...
