Daedong CK2610CHSE - Seat Adjustment

4
-
34
CK2610CHSE / CK3510(H,C,CH)SE / CK4010(H,C,CH)SE
(1) Seat Adjustment Lever
(A) Pull
To adjust the seat position, pull
up the lever (1) under the front of
the seat, slide the seat to the de-
sired position, and then release
the lever. Make sure that the seat
is firmly fixed by moving it gently
after adjustment.
SEAT ADJUSTMENT
SEAT SLIDING
A
1
A
1
tC2O450b
Do not put a hand between the
seat and the slides when ad-
justing the seat position. You
can get injured unexpectedly.
•
CAUTION
Never Leave the driver's seat
while the engine running.
Before leaving the seat, be
sure to turn off any imple-
ments which are equipped
with rotating blades such as
rotary tiller, rotary cutter, mid/
rear mower, snow blower, etc.
and turn off the engine.
•
•
WARNING
11
(1) Cushion Adjustment Lever
t21O459a
CUSHION STRENGTH ADJUSTMENT
The seat cushion can be adjusted
according to the weight of the driver.
Turning the cushion adjustment lever
(1) on the front of the seat to the (-)
direction makes the cushion softer
while turning it to the (+) direction
makes the cushion rmer.
TC220-영문-수출향(법인향)-OM-04.indd 34 2020-12-10 오전 10:45:47