4
-
42
CK2610CHSE / CK3510(H,C,CH)SE / CK4010(H,C,CH)SE
WORKING LIGHT
The working lights are installed to the
front and rear sections of the roof,
and their operating button is installed
to the right panel in the cabin.
(1) Working Light Switch (Front)
(2) Working Light (Front)
t21O424b
To t ur n o n, positio n t he switch
marked (front) to "ON" the position.
The key switch should be positioned
to the "ON" position at this moment.
Do not drive the tractor on a
road with the work lights ON
at night.
The approaching or following
vehicle’s visibility can be dis-
turbed, which is very danger-
ous for both drivers. In this
case, use the hazard lamps.
•
•
WARNING
1. To turn on, position the switch
marked (wiper) to the "ON" posi-
tion.
(1) Wiper Operating Switch (Front)
(3) Wiper (Front)
WIPER
t21O423b
To Next Page
Loading...
