(1) Clutch Pedal
Make sure to depress the clutch
pedal to its end. To start off smoothly,
put the main and range shift levers
into the proper positions and release
the clutch pedal slowly.
CLUTCH PEDAL
(1) Brake Pedal (LH) (2) Brake Pedal (RH)
(3) Pedal Interlock Latch
(A) Engage (B) Disengage
BRAKE PEDAL
(1) Brake Pedal
Never put your foot onto the
clutch pedal during driving.
Be sure to depress the clutch
pedal fully when shifting. Oth
-
erwise, the shift gear can be
broken.
•
•
IMPORTANT
t22O424a
t22O404a
t22O477a
MANUAL
HST
Interconnect the left and right
brake pedals to avoid rollover
or crash during driving or
moving in or out of a eld.
Avoid sharp turn and braking
at a high speed even in the
work eld. Otherwise the trac-
tor can be rolled over.
•
•
WARNING
1. Make sure to latch the left and
right brake pedals as shown in the
gure while driving on a road. The
tractor can roll over if depressing
only one brake pedal at a high
speed.
2. To make a sharp turn in a work
field, disengage the left and right
brake pedals to use one of brake
pedals separately. Unlock the
brake lock, and then turn the steer-
ing wheel while depressing the
brake pedal on the turning side.
To Next Page
Loading...
