6
-
8
CK2610CHSE / CK3510(H,C,CH)SE / CK4010(H,C,CH)SE
Never use any other part for
pulling except draw bar. Pull-
ing with top link, ROPS and
etc. will cause a fatal accident.
Be sure to install the auxiliary
safety chain when installing a
trailer.
Improper use of the draw-bar,
even if correctly positioned,
can cause a rear overturn.
Do not overloa d an imple-
ment or towed equipment.
Use proper counterweights to
maintain tractor stability. Hitch
heavy loads to the draw-bar
only.
Make sure that there is no one
nor object between the tractor
and trailer.
•
•
•
•
•
WARNING
PTO type
Nominal
diameter
Number and
type
of splines
Nominal PTO
rated rotational
frequency
Recommended PTO
power at rated engine
speed(kW)
1 35
6 straight
splines
540 Up to 25
SPECIFICATION
PTO sheild guard
Category Regulation
T1 Compliance with ISO 500-1
S43O120B
(1) PTO Shaft Cover
(2) PTO Shaft Cap
Before you install the some kind of
implement, take off PTO shaft cap(2)
and install the universal joint of im-
plement.
If necessary, fold up the PTO shield
guard (1).
PTO & PTO SHIELD GUARD
To Next Page
Loading...
