1. T he brake an d c lu tc h p ed als
should be inspected for free travel,
and smooth operation.
2. You should adjust these pedals
if an incorrect measurement is
found. (Refer to the instructions for
adjusting the clutch and brake ped-
als in the Chapter Maintenance.)
CHECKING BRAKE AND
CLUTCH PEDALS (H)
1. Inspect the instrument panel for
broken gauge(s), meter(s) and in-
dicators.
2. Replace if broken.
CHECKING HEAD LIGHT, HAZ-
ARD LIGHT ETC. (J)
1. Inspect the lights for broken bulbs
and lenses.
2. Replace if broken.
CHECKING SEAT BELT AND
ROPS (K)
1.
Always check the condition of the
seat belt and ROPS before operat-
ing the tractor.
2. Replace if damaged.
CHECKING GAUGES, METER
AND INDICATORS (I)
Whe n de pres sing the bra ke
pedals separated, both of the
brake pedals should be moved
down to the same depth.
•
NOTE
CHANGING ENGINE OIL AND
REPLACING FILTER (L)
(1) Oil Filler Hole (2) Oil Dipstick
(A) Oil Level Is Acceptable Within This Range
1. Park the tractor on a level ground
and start the engine to warm it up.
t22O706A
To Next Page
Loading...