Daedong CK2610CHSE - Engine Coolant Temperature Gauge

4
-
16
CK2610CHSE / CK3510(H,C,CH)SE / CK4010(H,C,CH)SE
ENGINE COOLANT TEMPERATURE GAUGE
This gauge indicates the coolant
temperature after the key switch is
turned to the “ON” position.
•
C: Coolant is cold.
• H: Coolant is hot.
When the pointer is in the zone “H"
during driving, it means that the en-
gine is overheated. Decrease work
load immediately.
(1) Coolant Temperature Gauge
(2) Normal Operating Range
C: Cold H: Hot
Add fuel immediately when
the fuel level warning lamp on
the instrument cluster comes
on.
•
WARNING
Make sure to use only genuine fuel
as the engine can be damaged if
unqualied fuel is used.
Use fuel for winter season in cold
weather to start the engine easier.
The gauge needle can move on a
hill as fuel slopes in the tank.
NOTE
Make sure to control the work
load so that the needle is not
in the red zone.
If the needle stays in the red
zone, do not stop the engine
immediately. Instead, reduce
the work load to cool down
the engine before stopping the
engine.
Make sure to keep the front
grill clean so that air is sucked
through it freely for fast cool-
ing.
•
•
•
CAUTION
tC2O419b
TC220-영문-수출향(법인향)-OM-04.indd 16 2020-12-10 오전 10:45:36