Daedong CK2610CHSE - Replacing Bulb (Aq)

7
-
46
CK2610CHSE / CK3510(H,C,CH)SE / CK4010(H,C,CH)SE
The main fuse is to protect electric
devices and wirings. If the ignition,
preheat, charge or main function is
faulty, find and move its cause and
replace the fuse with a new one.
Using a non-approved slow-
blow fuse can damage elec-
trical systems in the tractor
severely.
Refer to the chapter “Trouble-
s hoo t i n g” i n thi s ma n u al
or contact your local KIOTI
Dealer for specic information
dealing with electrical prob-
lems.
•
•
IMPORTANT
The bulbs and their capacity used
in this tractor are listed in the below
table. This section only describes
procedures the users can handle.
REPLACING BULB (AQ)
No. BULB CAPACITY
1 Headlamp 55W/55W
2 Position lamp (front) 5W
3
Stop/Position lamp
(rear)
21W/5W
4 Turn signal lamp 21W
5 Work lamp 21W
6 Rear work lamp 21W
HEADLAMP
1. Turn the key switch to the “OFF”
position and open the hood.
(1) Hood (2) Opening Button
(A) Press (B) Open
A
11
A
22
BB
tC2O752A
TC220-영문-수출향(법인향)-OM-07.indd 46 2020-01-23 오전 9:19:34