Daedong CK2610CHSE - Remote Hydraulics

5
-
24
CK2610CHSE / CK3510(H,C,CH)SE / CK4010(H,C,CH)SE
(1) Top Link
For implement installation to the
3-point hitch, refer to the operating
tips for the 3-point hitch (page 6-2).
tC2O523A
If the lifting arm is properly
operated but abnormal noise
is still heard, the hydraulic
system may be malfunction-
ing. In this case, let the engine
idle for an 10 to 15 minutes
additionally and then try to
start the engine again. If the
problem is still present, con-
tact your local KIOTI Dealer.
If the tractor has been stored
for a long period of time or
the transmission fluid is just
changed, abnormal noise may
be heard and the hydraulic
lifting arm may be inoperable
temporarily. In this case, let the
engine idle for 3 to 4 minutes.
•
•
CAUTION
(1) Double Acting Valve 1, Lever 1
(2) Double Acting Valve 2, Lever 2
(A) Port A (C) Port C
(B) Port B (D) Port D
REMOTE HYDRAULICS
D O U B L E A C T I N G L E V E R ( I F
EQUIPPED)
t22O502A
TC220-영문-수출향(법인향)-OM-05.indd 24 2020-01-23 오전 9:15:41