KEY SWITCH
(1) Key Switch
(B) OFF (C) ACC
(D) ON (E) START
START (E)
The position "E" indicates "Start." In
order to start the engine, depress the
clutch pedal and turn the PTO switch
off. As soon as the engine is started,
release the key then the key will re-
turn to the position "D."
OFF (B)
When the key switch is in the posi-
tion "B," the engine and all electrical
devices in the vehicle are turned off.
However, asher lights and turn sig-
nal lights can be operated along with
their indication lamps on the dash
board.
ACC (C)
When the key switch is turned to the
position "C," the flasher lights and
turn signal lights can be operated.
ON (D)
The position "D" indicates the "ON "
position. As soon as the key switch
is turned to this position, the oil
pressure warning lamp and battery
charge warning lamp come on (these
turn off after the engine is started)
and the automatic preheating func-
tion is activated.
The automatic preheating operation
is informed by illumination of the
preheat indicator on the instrument
cluster. In cold weather, preheat the
engine sufficiently until the preheat
indicator goes off (approx. 9 sec-
onds).
tC2O404d
To Next Page
Loading...
