Daedong CK2610CHSE - Flush Cooling System and Changing Coolant (AJ)

7
-
36
CK2610CHSE / CK3510(H,C,CH)SE / CK4010(H,C,CH)SE
Only install carbon lters sup-
plied sealed when delivered:
comply with the operating
instructions on the container
and enclosed in the lter pack-
age.
Ca ref ull y c omp ly with t he
operating instructions on the
filter packages or labels. Re-
place the lters at the intervals
specified by the filter manu-
facturer.
Contact your Dealer if specic
lters against chemicals must
be used.
•
•
•
CAUTION
Always wear the right sort of
personal protective equipment
to protect against the harmful
products used.
•
WARNING
4. Use clean, fresh water and anti-
freeze to ll the reservoir tank.
5. Follow the cleaner manufacturer’s
instruction.
FLUSH COOLING SYSTEM AND CHANGING COOLANT (AJ)
1. Park the tractor on level ground,
stop the engine and let the engine
cool down.
2. To drain coolant, remove the drain
plug from the radiator and turn the
radiator cap to the 1st notch to
release pressure in the radiator.
Then, remove the cap completely.
3. After all coolant is drained, t the
drain plug.
(1) Drain Plug
tC2O730B
TC220-영문-수출향(법인향)-OM-07.indd 36 2020-01-23 오전 9:19:28