t22O407a
PTO SWITCH (ON / OFF)
The PTO switch is used to supply
power from the tractor to the imple-
ment.
Make sure to put this switch into the
“OFF” position before starting the en-
gine. Otherwise, the engine cannot
be started.
The rear PTO rotates at 540 rpm
when the engine speed is approx.
2,400 rpm.
To activate the PTO, press and turn
the switch clockwise. To deactivate it,
press the switch once.
CAUTION
To avoid personal injury and ac-
cident:
B e f o r e d i s a s s e m b l i n g or
cl ean ing t he P TO s ystem ,
make sure that the PTO switch
is in the “OFF” position, the
engine is stopped, and all
parts are stopped.
Always keep the PTO driving
part clean. Also, check the
PTO cover is closed while PTO
is in operation.
Disengage the PTO while driv
-
ing the tractor on the public
road.
Be carefu l not to ge t your
hand, foot, cloth, or hair into
any driving part while the PTO
is in operation. You can be se-
verely injured.
Make sure that no one is around
the tractor and implement while
the PTO is in operation.
•
•
•
•
To Next Page
Loading...
