Daedong CK2610CHSE - ERROR Indicator

4
-
24
CK2610CHSE / CK3510(H,C,CH)SE / CK4010(H,C,CH)SE
ERROR INDICATOR
You can see the Error code below on the LCD window for Hour meter. When
You found these on the LCD, please contact with KIOTI dealer.
(1) Display
NO. DISPLAY DESCRIPTION
1 ERR-001 No Signal at TACHO Input
2 ERR-002 No Signal at Water Temp
3 ERR-006 No Signal at GLOW LAMP Input
4 ERR-007 No Signal at PTO CRUISE LAMP
5 ERR-008 No Signal at Water IN FUEL Input
6 ERR-009 No Signal at HOUR Input
Contact to local KIOTI dealer.
•
WARNING
Some error codes may not dis-
played depending on the model.
•
NOTE
CEL
N
CRUISE
PTO
LINKED
PEDAL
11
tC2O490b
ECU ERROR CODE
(CK3510/CK4010 ONLY)
1 2
4 3
5 6
1 2
4 3
5 6
t22O475a
(1) Total run hours
(2) dtc
(3) SPN
(4) FMI
(5) End
(6) Total run hours
If an error code occurs on the en-
gine, the information of (1) to (6) is
displayed on the hourmeter of the
LCD window at an interval of 1 sec-
ond.
TC220-영문-수출향(법인향)-OM-04.indd 24 2020-12-10 오전 10:45:42