4
-
10
CK2610CHSE / CK3510(H,C,CH)SE / CK4010(H,C,CH)SE
If the hazard lamp is turned on
for an extended period of time
while the engine is stopped,
the battery can be discharged.
Therefore, use them only in
emergency.
The hazard lamp can be oper
-
ated without the key inserted.
•
•
CAUTION
This switch can be used to warn
other vehicles when malfunction oc-
curs in the tractor while driving on a
public road. Pressing this switch up
blinks the hazard lamp and returning
it turns off the lamp. The turn signal
lights cannot be operated while this
switch is pressed up to operate the
hazard lamps.
HAZARD WARNING FLASHER SWITCH
(1) Hazard Warning Flasher Switch
(A) ON (B) OFF
tC2O410C
To activate the cruise control func-
tion, set the desired speed and press
the switch to the “ON” position.
Depress the HST pedal to increase
the driving speed in order to acceler-
ate at a constant speed. To deacti-
vate the cruise function, depress the
brake pedal or press the switch to
the “OFF” position.
The cruise function is not activated
during reverse.
To Next Page
Loading...