• Hitch loads to the drawbar only.
Towing or attaching to other loca-
tions may cause the tractor to over-
turn.
• Improper use of the drawbar, even
if correctly positioned, can cause a
rear overturn.
• DO NOT overload an attachment
or towed equipment. Use proper
counterweights to maintain tractor
stability. Hitch heavy loads to the
drawbar only.
TG2O111A
• Check for correct coupling between
tow hook and trailer. See the Tow-
ing Attachments section.
• U se b al la st weigh t as recom -
mended. NEVER add more ballast
to compensate a higher load than
allowed. Reduce load.
• Keep work surfaces and engine
compartments clean.
• Before cleaning the machine, al-
ways low er impl ements to the
ground, engage the first gear, en-
gage the parking brake, turn the
engine off and remove the key.
• Always use specic personal safety
devices for each service operation.
• Clean steps, pedals and oor. Re-
move grease or oil. Brush away
dust or mud. In winter, scrape away
snow and ice. Remember - slippery
surfaces are dangerous.
• Avoid using petrol, paraffin, paint
thinner etc. when cleaning plastic
parts, e.g.; console, instrument
cluster, monitors and gauges etc.
Use ONLY water, mild soap and
a soft cloth when you clean these
parts. Using petrol, paraffin, paint
thinner etc., will cause cracking
or deformation of the part being
cleaned.
• Remove and put away any tools,
buckets, chains and hooks.
CLEANING THE TRACTOR
To Next Page
Loading...