Daedong CK2610CHSE - Parking

5
-
16
CK2610CHSE / CK3510(H,C,CH)SE / CK4010(H,C,CH)SE
(1) Block
(2) Brake Pedal
(3) Parking Brake Lever
PARKING
22
33
T22O501A
1. Pull the parking brake lever (3)
down with the brake pedals de-
pressed forward to engage the
pedals with the latch. If the braking
force is insufficient, depress the
pedalsmorermly.
2. Before leaving the tractor after
parking it, make sure to stop the
PTO, lower the implement onto the
ground, and stop the engine.
3. If it is necessary to leave the trac-
tor with the engine running, put all
the shift levers in the neutral posi-
tion and apply the parking brake
rmly.
4. When parking the tractor on a
slope, stop the engine with the
parking brake applied and all gears
engaged in the low speed position.
5. If it is necessary to park the tractor
on a slope with the engine running,
apply the parking brake and chock
all four wheels.
6. To release the parking brake, de-
pressthebrakepedalsrmlyonce
again.
The brake pad can be rapidly
worn if you drive with the park-
ing brake applied.
Never park the tractor on a
steep slope in any circum-
stance. A severe accident can
occur.
•
•
WARNING
To avoid possible injury, death
or loss of property from a ma-
chine runaway:
With the engine off, the tractor
may move unexpectedly re-
gardless of the gear shift posi-
tion. Before leaving the trac-
tor, certainly apply the parking
brake to prevent machine run-
away.
※
Only H-shuttle model.
•
WARNING
TC220-영문-수출향(법인향)-OM-05.indd 16 2020-01-23 오전 9:15:37