Daedong CK2610CHSE - 3-POINT Hitch Control POSITION Control

5
-
22
CK2610CHSE / CK3510(H,C,CH)SE / CK4010(H,C,CH)SE
If stopping the engine while
driving, the steering perfor-
mance can become deterio-
rated due to loss of hydraulic
power, resulting in a severe
accident. Never stop the en-
gine while driving.
Keep your hands on the steer-
ing wheel after turning to re-
turn the steering wheel back
to the straight-ahead position.
This steering wheel is not a
self-return type. Taking your
hands off the steering wheel
during driving can lead to a
serious accident.
•
•
WARNING
The 3-point hitch can be controlled by
the position control lever.
1. The position control lever is used
to lift or lower the lifting arm (lower
link) of the 3-point hitch.
2. Pushing the lever forward lowers
the lower link while pulling the le-
ver backward lifts the lower link.
3. The height of the lower link is pre-
cisely controlled proportional to the
position of the lever.
(1) Position Control Lever
(A) Lowering (B) Lifting
t22O512A
3-POINT HITCH CONTROL POSITION CONTROL
(1) Lower Link
td2O520A
4. The lower link is lifted by the hy-
draulic energy of the tractor while it
is lowered by potential energy of its
own weight. Therefore, the imple-
ment cannot be lowered by the hy-
draulic pressure.
5. Therefore, the implement attached
to the lower link may be lifted by
protrusion on the ground when it is
lowered to the ground. It is called
as"oating."
TC220-영문-수출향(법인향)-OM-05.indd 22 2020-01-23 오전 9:15:40