Daedong CK2610CHSE - Tread

4
-
56
CK2610CHSE / CK3510(H,C,CH)SE / CK4010(H,C,CH)SE
t46w031a
Do not weld or apply heat to
the tire rim or disc. The tire
can explode due to the rapidly
increased pressure in the tire.
Check tires for ination pres-
sure, damage, deformation,
and excessive wear on lug and
damage of rim and disc. Also
check if wheel bolts, rim bolts,
and nuts are loose.
•
•
WARNING
TREAD
When working on a eld where crops are linearly aligned, the tread should be
adjusted so that the tires do not cross over the crops. Also, it is necessary to
increase the tread to prevent any accident when working on a slope or trailing.
(1) Bolt (2) Rim bolt (3) Rim (4) Disc
Never operate the tractor with a loose rim, wheel, or axle.
Always tighten nuts or bolts to the specied torque.
Make sure to perform inspection daily.
•
•
WARNING
td2O457b
TC220-영문-수출향(법인향)-OM-04.indd 56 2020-12-10 오전 10:45:58