(1) Cap (2) Connector
2. Remove the cap.
3. Press and turn the socket coun-
terclockwise to remove the bulb. If
the bulb is blown, replace it with a
new bulb with the same capacity.
td2O739A
Mak e su r e t o u se a KI OT I
genuine bulb. Using a non-
recommended bulb can cause
a re.
The headlamps can temporar-
ily be fogged due to rain or
car wash. This is because of
the temperature difference be-
tween the inside and outside
of the lamp, which is normal.
•
•
CAUTION
If using a bulb other than the
specied one, the lamp can be
damaged and the tractor can
even catch re.
Make sure to use bulbs with
the specied capacity.
•
•
WARNING
REAR TURN SIGNAL LAMP AND
POSITION LAMP
tC2O739A
(1) Turn Signal Lamp
1. The rear turn signal lamps are
mounted on the rear fender.
To Next Page