Daedong CK2610CHSE - Page 134

5
-
4
CK2610CHSE / CK3510(H,C,CH)SE / CK4010(H,C,CH)SE
(1) Main Shift Lever
(2) Range Shift Lever
3. Set the main, range and shuttle
shift levers in the neutral position.
(1) Position Control Lever
(A) Down
4. Lower the implement by pushing
the position control lever forward.
Make sure that no one is near
the implement or behind the
tractor.
•
WARNING
1
2
1
2
t21O502b
t22O509A
MANUAL
HST
t22O510A
1. Make sure there is no obstacle
around the tractor.
2. Securely engage the parking brake
and depress the brake pedal.
Make sure that the brake ped-
als are fully depressed before
pulling the parking brake lever
up.
•
IMPORTANT
When the parking brake is en-
gaged, the parking brake lamp
on the instrument cluster illu-
minates. When releasing it, the
parking brake lamp is turned off.
•
NOTE
TC220-영문-수출향(법인향)-OM-05.indd 4 2020-01-23 오전 9:15:31