Daedong CK2610CHSE - Page 168

6
-
10
CK2610CHSE / CK3510(H,C,CH)SE / CK4010(H,C,CH)SE
11
C56O140A
T66O122A
(1) Lock Pin
Before starting up any PTO-
driven implement hitched to
the three-point linkage, lift the
implement to its full height
and check that at least 1/4 of
the total length of the tele-
scopic section of the drive
shaft is engaged.
•
WARNING
Make sure that the PTO safety
cover is in its position before
driving the PTO shaft.
Never go close to the rotating
PTO or universal joint shaft. A
severe accident can happen.
Before driving an implement
through the PTO, always make
sure that all bystanders are
well away from the tractor.
When using the PTO drive with
a stationary tractor, always
make sure that the gears are
in neutral and that the parking
brake is applied.
The tractor PTO and universal
joint should not be interfered
by any surrounding parts.
•
•
•
•
•
WARNING
TC220-영문-수출향(법인향)-OM-06.indd 10 2020-01-23 오전 9:17:58