td2O743A
(1) Turn Signal Lamp (2) Position Lamp
4. Turn the socket counterclockwise
to remove the bulb and replace it
with a new one.
FRONT TURN SIGNAL LAMP AND POSITION LAMP
1. The front turn signal lamps are in
-
stalled onto the ROPS frame.
2. Loosen the screw to remove the
lens.
tC2O740A
(1) Screw (2) Lens
3. Remove the bulb by turning its
socket counterclockwise. Install a
new bulb.
td2O745B
(1) Turn Signal Lamp Bulb
(2) Position Lamp Bulb
To Next Page