BULBS REPLACEMENT
HEADLIGHT BULB
● Remove the front cover. ( 3-5 )
● Remove the headlight rubber cover.
● Push down on the socket and turn to the left.
● Replace with new bulb.
NOTE
·Before replacing the bulb, be sure to check the
swtiches for loose connection of the connectors.
● Install in the reverse order of removal.
WARNING
·Headlight bulbs become very hot while the headlight
is ON, and remain hot for a while after they are
turned OFF.
·Be sure to turn the ignition switch OFF and let the
bulb cool down before replacement.
CAUTION
·If you touch the bulb with your bare hands, clean it
with a cloth moistened with denatured alcohol to
prevent early bulb failure.
·Be sure to install the dust cover after replacing the
bulb.
FRONT WINKER BULB
● Remove the front cover. ( 3-5 )
● Remove the bulb from the socket, replace with new bulb.
● Install in the reverse order of removal.
16-5
LIGHTS/METER/SWITCHES
To Next Page
Loading...
