● Remove the oil seal stop ring.
● Remove the oil seal.
● Remove the fork tube from the bottom case.
● Remove the piston and rebound spring from the fork
tube.
FRONT FORK
INSPECTION
● Place the fork spring on a level place, and measure the
free length.
● If the free length deviates from the service limit,
replace the spring with a new one.
● Check components for damage or abnormal wear.
Replace defective parts with new ones.
SERVICE LIMIT : FORK SPRING 235mm
● Set the fork pipe on a V-blocks, and measure fork pipe
deflection by rotating with a dial gauge.
SERVICE LIMIT : Replace if the deflection is greater
than 0.2mm
14-16
FRONT WHEEL/FRONT FORK/STEERING/BRAKE
·Take precautions not to damage the interior and
exterior rim of the bottom case.
OIL SEAL
STOPPER RING
OIL SEAL
STOPPER RING
OIL SEAL
STOPPER RING
OIL SEAL
STOPPER RING
OIL SEAL
STOPPER RING
OIL SEAL
STOPPER RING
OIL SEAL
STOPPER RING
OIL SEAL
STOPPER RING
OIL SEAL
STOPPER RING
OIL SEAL
STOPPER RING
OIL SEAL
STOPPER RING
OIL SEAL
STOPPER RING
OIL SEAL
STOPPER RING
OIL SEAL
STOPPER RING
OIL SEAL
STOPPER RING
OIL SEAL
STOPPER RING
OIL SEAL
STOPPER RING
OIL SEAL
STOPPER RING
OIL SEAL
OIL SEAL
OIL SEAL
OIL SEAL
OIL SEAL
OIL SEAL
OIL SEAL
OIL SEAL
OIL SEAL
OIL SEAL
OIL SEAL
OIL SEAL
OIL SEAL
OIL SEAL
OIL SEAL
OIL SEAL
OIL SEAL
OIL SEAL
FORK TUBE
TOP BOTTOM
BOTTOM CASE
To Next Page
Loading...
Need help?
General
