Dahua DH-XVR1B08 User Manual

Local Configurations 126
Figure 5-87
Configure the settings for IP address, subnet mask, default gateway, user name, and Step 2
password.
Enable the Add function to add the device into the Added Device area. Step 3
Click OK to save the settings. Step 4
 To modify IP address in batches, do the following:
In the Searched Device list area, select the devices that you want to modify IP address Step 1
in batches.
Click . Step 2
The Modify IP interface is displayed. See Figure 5-88.
Figure 5-88
Enable the Batch Modify function. Step 3
Configure the settings for start IP address (the IP address is allocated in sequence), Step 4
subnet mask, default gateway, user name, and password.
Enable the Add function to add the devices into the Added Device area. Step 5
Click Apply to save the settings. Step 6

Dahua DH-XVR1B08 Specifications

General

Audio Input	1 channel, RCA
Audio Output	1 channel, RCA
Video Output	1 HDMI, 1 VGA
USB	2 USB 2.0 ports
Power Supply	DC12V/1.5A
Video Compression	H.265/H.264
Analog Camera Input	8 channels, BNC
IP Camera Input	8
HDD	1 SATA port, up to 6TB
Network	1 RJ-45 port (10/100 Mbps)
Operating Temperature	-10°C to +55°C
Operating Humidity	10% to 90%
Max Recording Resolution	1080N/720p/960H/D1/CIF