Dahua DH-XVR1B08 User Manual

Local Configurations 249
Figure 5-210
Configure the settings for the alarm center parameters. See Table 5-69. Step 2
Parameter
Description
Enable
Enable the alarm center function.
Protocol Type
In the Protocol Type list, select protocol type. The default is
ALARM CENTER.
Host IP
The IP address and communication port of the PC installed with
alarm client.
Port
Self-Report Time
In the Self-Report Time list, select time cycle and specific time for
uploading alarm.
Table 5-69
Click Apply to complete the settings. Step 3
5.15.1.13 Configuring P2P Settings
You can manage the devices by using P2P technology to download the application and register
the devices. For details, see "5.1.4.5 Configuring P2P Settings."
5.15.1.14 802.1x
The Device can be connected with LAN after passing 802.1x certification.
Select Main Menu > NETWORK > 802.1x. Step 1
The 802.1x interface is displayed. See Figure 5-211 and Figure 5-212.

Dahua DH-XVR1B08 Specifications

General

Audio Input	1 channel, RCA
Audio Output	1 channel, RCA
Video Output	1 HDMI, 1 VGA
USB	2 USB 2.0 ports
Power Supply	DC12V/1.5A
Video Compression	H.265/H.264
Analog Camera Input	8 channels, BNC
IP Camera Input	8
HDD	1 SATA port, up to 6TB
Network	1 RJ-45 port (10/100 Mbps)
Operating Temperature	-10°C to +55°C
Operating Humidity	10% to 90%
Max Recording Resolution	1080N/720p/960H/D1/CIF