Dahua DH-XVR1B08 User Manual

Local Configurations 248
Figure 5-209
Configure the settings for the register parameters. See Table 5-68. Step 2
Parameter
Description
Enable
Enable the register function.
Server IP Address
Enter the server IP address or the server domain that you want to
register to.
Port
Enter the port of the server.
Sub Service ID
This ID is allocated by the server and used for the Device.
Table 5-68
Click Apply to complete the settings. Step 3
5.15.1.12 Configuring Alarm Center Settings
You can configure the alarm center server to receive the uploaded alarm information. To use
this function, the Alarm Upload check box must be selected. For details about alarm event
settings, see "5.10 Alarm Events Settings."
Select Main Menu > NETWORK > ALARM CENTER. Step 1
The ALARM CENTER interface is displayed. See Figure 5-210.

Dahua DH-XVR1B08 Specifications

General

Audio Input	1 channel, RCA
Audio Output	1 channel, RCA
Video Output	1 HDMI, 1 VGA
USB	2 USB 2.0 ports
Power Supply	DC12V/1.5A
Video Compression	H.265/H.264
Analog Camera Input	8 channels, BNC
IP Camera Input	8
HDD	1 SATA port, up to 6TB
Network	1 RJ-45 port (10/100 Mbps)
Operating Temperature	-10°C to +55°C
Operating Humidity	10% to 90%
Max Recording Resolution	1080N/720p/960H/D1/CIF