Local Configurations 54
The Reset Password interface is displayed. See Figure 5-12.
After clicking OK, the system will collect your information for password reset, and the
information includes but not limited to email address, MAC address, and device serial
number. Read the prompt carefully before clicking OK.
Figure 5-12
Reset the password. Step 4
QR code
Follow the onscreen instructions to get the security code in your reserved email
address. In the Security code box, enter the security code.
You can get the security code twice by scanning the same QR code. If you
need to get the security code once again, refresh the interface.
Use the security code received in your email box to reset the password within
24 hours; otherwise the security code becomes invalid.
Security questions
On the Reset password interface as shown in Figure 5-11, in the Reset Type list, 1)
select Security Questions, the Security Questions interface is displayed, see
Figure 5-13.
If you did not configure the security questions before, in the Reset Type list, there
will be no Security Questions.
In the Answer box, enter the correct answers. 2)
To Next Page
Loading...
Need help?
General
