Dahua DHI-ARC3008C - Area Arming and Disarming

User’s Manual
95
Figure 8-8 Expansion module
I/O
In
I/O
, you can configure parameters for
Wired Zones
,
IN AND ZONES
, and
Output
.
Wired Zones
On the client interface, select
I/O
>
Wired Zones
, and the
Wired Zones
page is shown. You can start
configuring the parameters if needed, and the settings will be effective in real time. For details, see
"7.6 Wired Zones".
Figure 8-9 Wired zones
In And Zones
On the client interface, select
I/O
>
In And Zones
, and the
In And Zones
page is shown. You can
start configuring the parameters if needed, and the settings will be effective in real time. For details,
see "7.8 In and Zones".
Figure 8-10 In and zones
Outputs
On the client interface, select
I/O
>
Outputs
, and the
Outputs
page is shown. You can start
configuring the parameters if needed, and the settings will be effective in real time. For details, see