User’s Manual
67
By pressing + 2, you can enter the
EDITING
mode for changing the description of
holiday.
Figure 7-17 Holiday time
●
1: Holiday start day.
●
2: Holiday start month.
●
3: Holiday end day.
●
4: Holiday end month.
●
5: Holiday year.
Step 4 Enter the value and press to confirm the setting, or press and to change the
value, and then move on to the next field.
Step 5 Press to return to the holiday selection menu.
Then you can continue with programming other holidays, or press to return to the
HOLIDAY
menu from where you can press and to move to the next menu or
press to exit from the installer menu.
To delete a holiday, on the
Holiday
screen where the holiday name is shown, press and
hold for at least three seconds.
7.17 Telephone Number
The
TEL NUMBER
menu is used to set the telephone numbers that will be used by the 2G/4G
module for voice calls and/or SMS.
Up to 8 different telephone numbers can be programmed for voice calls and remote control by
dialing, 8 numbers for SMS and remote control by SMS. The same telephone number can be used for
a different number of voice calls/SMS (such as alarm, robbery, and 220 VAC failure).
Step 1 After entering the installer menu, press and to scroll up and down until you reach
the
TEL NUMBER
menu.
Figure 7-18 Tel number
Step 2 Press to enter the programming mode.
There are three options:
TEL NUM
,
SMS NUM
, and
SIM NUM
. Press and to alter
the options.
●
TEL NUM
To Next Page
Loading...
Need help?
General
