User’s Manual
23
Key Function
●
Move the pointer to the left when you edit.
●
Press and hold to delete the text.
●
Bypass the zones as follows.
1. enter the access code.
2. Press , and then the screen of setting the bypass zones is
displayed.
3. Press the corresponding numeric key of the zones that you
want to bypass. For example, if you want to bypass zone 12,
press key 1 and then press key 2.
4. Press Enter to confirm the setting.
●
Enter the user menu or the installer menu.
●
Quick enter. For example, if you enter 130, press immediately to
confirm, otherwise it will become invalid.
●
Quick jump. For example, if there are 300 logs and you want to
view the 200
th
log, enter 200, and then press immediately to
jump to the 200
th
log page
●
Increase or decrease numbers.
●
Navigate between the options on the screen.
●
Turn pages.
●
Enter the password, and press , and then enter the
authorization mode.
●
Enter the sub menu.
●
Switch to the next menu of the same level in editing mode.
●
Confirm.
●
Arm the whole areas.
●
Rapid global arming of the whole areas.
●
Key combination operations.
●
Arm the partition 1.
●
Rapid arming of the partition 1.
●
Key combination operations.
●
Arm the partition 2.
●
Rapid arming of the partition 2.
●
Key combination operations.
●
Disarm.
●
Move the pointer to the right when you edit number or letter.
4.5.3 Key Combination Operations
Press keys in sequence.
For example, if you need to press + 0, press first, and then press 0.
To Next Page
Loading...
Need help?
General
