Dahua DHI-ARC3008C User Manual

User’s Manual
60
Table 7-13 System timing settings
Submenu Setting
SIR AL DUR
Siren alarm duration.
Set the alarm lasting time of the siren.
The minimum time that the bell can be set is 00:30 (30s).
SIR AL DLY
Siren alarm delay.
Set the delay time for alarm output from siren.
CHIME AL DUR
Chime alarm duration.
Set the activation time of the chime alarm.
FIRE AL DUR
Fire alarm duration.
Set the activation time of the fire alarm.
PANIC AL DUR
Panic alarm duration.
Set the activation time of the panic alarm.
HOLDUP AL DU
Hold-up/robbery alarm Duration.
Set the activation time of the robbery alarm.
MEDICL AL DU
Medical alarm duration.
Set the activation time of the medical alarm.
AC LOSS DLY
AC loss delay.
Set the delay time for the activation of the outputs that follow a main
power loss condition.
PATROL DISARM
Set the disarming time period for the patrol user. If you set the time
to 0, disarming is not allowed.
ZONE IN TEST
Set the time period for the test mode of zone. After this period, the
zone returns to ACTIVE.
PROGRAM TIME
Technician timer program.
Set the maximum time available for technician to program the
system after user authorization. Valid time from 01 to 10 hours.
WATER LEAK AL DUR
Water leak alarm duration.
Set the activation time of the water leak alarm.
Step 4 Press to return to the
SYSTEM TIMING
menu.
Then you can press and to move to the next menu or press to exit from the
installer menu.
7.13 System Timer
Step 1 After entering the installer menu, press and to scroll up and down until you reach
the
SYSTEM TIMERS
menu.

Dahua DHI-ARC3008C Specifications

General

Brand	Dahua
Model	DHI-ARC3008C
Category	Controller
Language	English