User’s Manual
109
Figure 9-5 Zone 1
Step 3 Configure the zone 1 parameters.
●
Protection Zone Name
: Tap it to edit the zone name, for example, enter Front Gate.
●
Detector Status
: Indicates the detector status that includes normal, open, tamper, anti-
mask, and short-circuit.
●
Bypass
: Switch to , and then the selected zone will be bypassed.
●
Linked Channel
: Tap it to select a linked video channel, and then tap
Live View of
Linked Channel
to view the live video.
9.5 Configuring Device on App
9.5.1 Configuring Alarm Controller
Step 1 On the
Home
screen, tap the added alarm controller.
Step 2 On the device operation interface, tap at the upper-right corner to enter the device
details interface.
You can also enter the device details interface by tapping of the added device, and
then tap
Device Details
on the
Home
screen.
Step 3 Configure device parameters.
●
Device Configuration
: Tap to configure the alarm controller, such as modifying the
device name, device password, and viewing device SN.
●
Alarm Subscription
: Switch to to enable alarm message notification, and
To Next Page
Loading...
Need help?
General
