Dahua DHI-ARC3008C User Manual

User’s Manual
83
the
LOG EVENT
menu.
Figure 7-29 Log event
Step 2 Press to enter the submenu that shows the latest stored event.
Figure 7-30 The latest stored event
●
The first line shows the event with its number and the date and time.
●
The second line shows the event details.
Step 3 Press and to select the log event.
Step 4 (Optional) For some events, you can press to extend the display to view more details
of the event.
Step 5 Press to return to the log event selection menu.
Then you can press continue with viewing other log events, or press to return to the
LOG EVENT
menu from where you can press and to move to the next menu or
press to exit from the installer menu.
7.25 2G/4G Module
Step 1 After entering the installer menu, press and to scroll up and down until you reach
the
2G/4G MODULE
menu.
Figure 7-31 2G/4G Module
Step 2 Press to enter the programming mode.
Step 3 Configure the parameters.
Table 7-27 2G/4G Module
Submenu Settings
2G/4G ENABLE
●
YES
●
NO
P2P ENABLE
●
ENABLE
: Enables the DMSS app to access the controller.
●
DISABLE
: Disables the DMSS app to access the controller.
Step 4 Press to return to the
2G/4G MODULE
menu.
Then you can press and to move to the next menu or press to exit from the
installer menu.

Dahua DHI-ARC3008C Specifications

General

Brand	Dahua
Model	DHI-ARC3008C
Category	Controller
Language	English