User’s Manual
99
Figure 8-19 Telephone No.
You can select
Voice
,
SMS
, or
SMI Number
as
Telephone No. type
.
Vocal Message
On the client interface, select
Communication
>
Vocal Message
, and the
Vocal Message
page is
shown. You can start configuring the parameters if needed, and the settings will be effective in real
time. For details, see "7.20 Vocal Messages".
Figure 8-20 Vocal message
Digital Port
In
Digital Port
, you can configure parameters for
Setting
,
SYS Event
,
Module Event
,
Emergency
Event
,
Arm/Disarm Event
and
Zones Event
.
Setting
On the client interface, select
Digital Port
>
Setting
, and the
Setting
page is shown. You can start
configuring the parameters if needed, and the settings will be effective in real time. For details, see
"7.19 Monitor Station".
Figure 8-21 Setting
SYS Event
On the client interface, select
Digital Port
>
SYS Event
, and the
SYS Event
page is shown You can
To Next Page
Loading...
