User’s Manual
VII
acceptable.
●
The most important controls:
◇
The status of the power supplies and batteries.
◇
The status of the batteries and self-powered devices (sirens and transmitters).
◇
The functional efficiency and coverage of the movement and perimeter detectors.
◇
The efficiency of the control units and procedures for arming of the program.
◇
The efficiency of the alarm transmission equipment (e.g. activation of the telephone call
cycle).
◇
The efficiency of the warning devices.
◇
The correct detection and management of the tamper alarms.
◇
The other secondary functions (for example,. activation of the hold-up alarm).
◇
The correct connection of the cables to the terminals.
◇
The final inspection report.
●
Dispose used batteries strictly according to its instructions and local regulations.
●
Power off the controller before maintenance.
●
To prevent explosion or fire, replace battery with the same size.
To Next Page
Loading...
