Web Operation Manual
37
5.4.2.1.1 Rule Configuration
You can select the traffic violation types and configure the corresponding parameters of the images
of the captured vehicle.
Select Setting > Event > Electronic Police > Illegal Capture > Rule Config. Step 1
Rule configuration (1) Figure 5-20
Click , and then configure picture parameters. Step 2
The parameter table describes the parameters involved in all event types, and might differ
from the actual page.
Configure picture parameter (1) Figure 5-21
Table 5-9 Picture parameter (1)
Category Name Description
Picture
Parameter
Setting
Original Image The original picture of the vehicle that is violating traffic rules.
Compound
Image
The compound picture of several sequential images of the vehicle
violating the traffic rules.
Feature Picture The close-up of the offending vehicle.
Local Save
Save the vehicle picture locally when an offending vehicle is
captured.
Report Picture Upload the vehicle picture to the upper-level device or platform
when a vehicle is captured.
To Next Page
Loading...
Need help?
General
