Web Operation Manual
56
5.4.5 Configuring Traffic Flow Analysis
5.4.5.1 Traffic Data
You can configure the lane and the period of traffic flow statistics, and then the flow data will be
displayed in the Traffic Flow Data and Pedestrian Flow Data tabs.
Select Setting > Event > Electronic Police > Traffic Flow > Flow Data. Step 1
Select the Pedestrian Flow Enable checkbox to enable statistics of pedestrian flow as Step 2
needed.
Set the Period and Flow Upper Limit of making statistics. Step 3
Select the lane that you want to make flow statistics. Step 4
Click Confirm. Step 5
5.4.5.2 Traffic Flow Data
After enabling traffic flow statistics, you can view the traffic flow data of the defined lane within the
defined period by clicking the Traffic Flow Data tab. The flow data will automatically update when a
period ends.
Click to clear the flow information.
Click Export to export the flow information to local PC.
5.4.5.3 Pedestrian Flow Data
After enabling pedestrian flow statistics, you can view the pedestrian flow data of the defined lane
within the defined period by clicking the Pedestrian Flow Data tab. The flow data will automatically
update when a period ends.
Click to clear the flow information.
Click Export to export the flow information to local PC.
5.4.6 Cutout
5.4.6.1 Snapshot Cutout
The Camera can recognize and crop snapshots, and save the cutouts.
The page and function might vary in ANPR, and E-Police, and might differ from the actual page and
function.
Select Setting > Event > ANPR Snap > Cutout > Cutout. Step 1
Select the cutout type. Step 2
To Next Page
Loading...
Need help?
General
