Web Operation Manual
46
5.4.2.2.5 Intelligence Default
Select Setting > Event > Electronic Police > Intelligent Analysis > Intelligence Default. Step 1
Click Default to restore settings including lane property, violation capture and intelligent Step 2
business to default.
5.4.3 Configuring ANPR Snapshot
Configure ANPR parameters.
Make sure that you have set Intelligence Scheme to ANPR. For details, see "5.4.1.1 Switching
between E-police and ANPR".
5.4.3.1 Configuring Illegal Capture
Configure the video detection parameters for detecting traffic violations.
Follow this order to configure violation capture: Rule config > lane property > lane config > vehicle
detection (Car Detect) > other settings. This is described separately in the configuration order below.
Configuration order for violation capture (2) Figure 5-31
5.4.3.1.1 Rule Configuration
You can select the traffic violation types and configure the corresponding parameters of the images
of the offending vehicle.
Select Setting > Event > ANPR Snap > Illegal Capture > Rule Config. Step 1
To Next Page
Loading...