Web Operation Manual
8
Table 2-2 Image adjustment
Icon Name Description
Brightness
Adjust the overall image brightness. Change the value when the image
is too bright or too dark. The range is from 0 to 128 (64 by default).
Contrast
Change the value when the image brightness is suitable, but contrast is
not enough. The range is from 0 to 128 (64 by default).
Hue
Adjust the image hue. For example, change red into blue. The default
value is made by the light sensor and normally it does not have to be
adjusted. The range is from 0 to 128 (64 by default).
Saturation
Adjust the vividness of the colors, without influencing
brightness of the image. The range is from 0 to 128 (64 by default).
—
Click it to restore brightness, contrast, saturation, and hue to their
default values.
In this image adjustment window, you can only adjust image brightness, contrast, hue, and
saturation of local web. To adjust system brightness, contrast, hue and saturation, go to Setting >
Camera > Camera Attribute > General.
Plate Number Recognition 2.3
Displays the plate number recognized by the Camera in real-time when a vehicle passes.
Plate Snapshot 2.4
Displays the snapshot of a license plate when a vehicle passes.
System Functions 2.5
Click the icons to set system functions, which include playback, video recording and snapshot query,
intelligent rules setting, alarm event setting, and system logout. See more details in the following
chapters.
Functions on the Live Interface 2.6
Set functions on the Live page, and then the system will display the desired information on the Live
page.
To Next Page
Loading...
Need help?
General
